1 Dr. S.K.SRIVASTAVA HOD and R&D
Publications :
- P.C.Sajith Kumar, K.Sudarsan and S.K.Srivastava (2004): Experimental Testing of Underwater Towed Body, Proc. of 3rd International Conf. ICTACEM-2004,IIT Kharagpur (28-30 Dec 2004), pp 340-343
- S.K.Srivastava (2002): Turbulent Pressure Fluctuations in Towed Array Sonar, Proceedings of International Conf. ICONS-2002,Kochi, India (11-13 Dec 2002), pp 887-890
- S.K.Srivastava (2001): Effect of Hydrodynamic Mass on a Cable Towing Sonar Array, Paper No. 132, Underwater Defence Technology (UDT),Hawaii 2001 Conf., Hawaii, USA (30th Oct – 1st Nov 2001)
- S.K.Srivastava (2000): Hydrodynamic Effect of Cross-Currents on Underwater Laying of Tubular Sonar Array, Paper No. 65 PII.2, Underwater DT, Pacific 2000 Conf., Sydney, Australia (7-8 Feb 2000)
- S.K.Srivastava (1998): Complex Hydro-structural Acoustic Stealth, Proceedings of Naval Research Board National Seminar, Kochi, India (27-28 Nov 1998), pp 106-109
- S.K.Srivastava (1998): Ocean Engineering Aspects of Submarine Sonar Dome, Paper No. 65, PII, Underwater Defence Technology (UDT) Europe 98 Wembley Conf., London, UK (23-25 June 1998)
- Srivastava S. Kishore (1997-98): Realignment Time Estimation of a Towed Array Sonar, Paper No. 115, PIIB.17, Proc. of UDT, Pacific 98 Conference, Sydney, Australia (24-26 Feb 1998), pp 268-271
- S.K.Srivastava & C.Ganapathy (1997-1998): Experimental Investigations on Loop Manoeuvre of Underwater Towed Cable-Array System, Ocean Engg, Vol-25, No.1, Pergamon press, New York (USA), pp 85-102.
- Srivastava S K and C.Ganapathy (1996): Analytical Investigations On Loop Manoeuvre of Underwater Towed Cable-Array System, Applied Ocean Research, Vol-18, No.6, Elsevier Science Ltd, (UK), pp 353-360.
- S.K.Srivastava (1987): Experimental Studies to Determine Strain Concentration Factors for Space Tubular Joints, International Journal of Strain Analysis, Vol-22, No. 4, pp 237-245.
- S.K.Srivastava (1986): Studies on Simple K and Space TK Tubular Joints, Proceedings of 3rd Indian Conf INCOE-86,IIT – Bombay (11-13 Dec 1986), pp 349-358
- S.K.Srivastava (1978): Design, Fabrication and Testing of Scaled-Down Offshore Buoy Model, Departmental Research Report, RR-No. 10/78, NPOL, Kochi, India
2 BHARAT V.
International / National Journal Publications :
- Bharath V, Madeva Nagaral, V. Auradi and S A. Kori ; “Preparation of 6061Al-Al2O3 MMC’s by Stir Casting and Evaluation of Mechanical and Wear Properties.” Procedia of Material Science, Elsevier Publications, 2014
- Bharath V, Madeva Nagaral, V. Auradi and S A. Kori; “Studies on dry sliding wear characteristics of ceramic Al2O3 particulate reinforced 6061Al matrix composites.” Proceedings of ICRAMID 2014 to be Published in Advanced Material Research Journal
- Bharath V, Madeva Nagaral, V. Auradi and S A. Kori; “Influence of addition level of Al2O3 Particulate on the mechanical and wear behaviour of 6061Al alloy matrix” Transaction of the Indian Institute of Metals, Springer journal 2015(Accepted for Publication manuscript ID AMMP2015-18)
- Madev Nagaral, Bharath. V and V. Auradi; “Effect of Al2O3 Particles on Mechanical and Wear Properties of 6061Al Alloy Metal Matrix Composites” International Journal Material Science & Engineering, ISSN: 2169-0022 ,Volume 2 Issue 1 January 05, 2026
- Bharath V, Madeva Nagaral and V. Auradi; “Preparation of 6061Al-Al2O3 Metal Matrix Composite by Stir Casting and Evaluation of Mechanical Properties.” An International Journal of Metallurgical & Materials Science and Engineering (IJMMSE) Trans- stellar Journal Publications, Vol.2, Issue 3 Sep 2025 22-31.
- Bharath V, Madeva Nagaral and V. Auradi; “Synthesis and Characterization of 6061Al/Al2O3 Particulate Metal Matrix Composites”, Bonfring International Journals Digital Proceedings,2014,517-522
Conference Presentations :
- Bharath V, Madeva Nagaral and V. Auradi; “Preparation of 6061Al-Al2O3 MMC’s by Stir Casting and Evaluation of Mechanical and Wear Properties.” 3rd International Conference on Materials Processing and Characterization (ICMPC-2014) 8th-9th March-2014, Hyderabad,India
- Bharath V, Madeva Nagaral, V. Auradi and K I Parashivamurthy, “Processing and Evaluation of Wear Behavior of Al6061-6%Al2O3-6%Graphite Particulate Composites” International Conference on Advances in Design and Manufacturing 5th-7th December 2014, NIT, Tirchy
- Bharath V, Madeva Nagaral and V. Auradi; “Studies on dry sliding wear characteristics of ceramic Al2O3 particulate reinforced 6061Al matrix composites.” International Conference on Recent Advances in Mechanical Engineering and Interdisciplinary Developments (ICRAMID-2014) 7thMarch 2014, at Ponjesly College of Engineering, Nagercoil, Kanyakumari Dist.Tamilnadu, India
3 NAGESHA K.V.
Papers/Conferences :
1) KV Nagesh, M.S.Krupashankara, (2013)Presented a paper in International Conference on “Parametric study on ball mill for synthesis of Ulatrafine powders” in NITK, Surathkal.
2) KV Nagesh, Presented a paper in National Conference on (2013)“Planetary ball mill for synthesis of Ultrafine Powders. AIET, Moodbideri.
3) K V Nagesha1, Rajanish M2 (2013). A REVIEW ON MECHANICAL ALLOYING.IJERA., Vol.3, pp.921-924
4) SHIVAPPA D1, K. V NAGESHA2 & N. SHIVAKUMARA3 (2013).COMPARATIVE STUDY OF SINTERED SPUR GEAR FOR BOTH STANDARD AND PROFILE CORRECTED TOOTH .Impact journal, Vol. 1, Issue 7, pp-1-6
Seminars/Conferences/Workshops Attended :
1) “Advanced Forming Technologiest” at RVCE,Bangalore(2010)
2) “Recent Trends in Monitoring,Control and Abatement of Air Pollution” at NITK,Surathkal(2013)
3) “Research Methodology and Structural Equation Modeling” at NITK, Surathkal(2014
4 SYED IMRAN ISHAQI
- Research Papers entitled “Modeling and Analysis of Pin joints on Composite laminate structure using FEM/ANSYS”, has been Published at International conference on Recent Developments in Structural Engineering (RSDE -2007) at Manipal Institute of Technology, Manipal -576104.
- Research Papers entitled “Studies on Stress Concentration around fillets in Press frame using FEM/ANSYS” and "Fracture mechanics investigation of cracks in rotating disc made of functionally graded materials", has been accepted and published at International and INCCOM-6 Conference on "Future Trends in Composite Materials and Processing"at Indian Institute of Technology, Kanpur during December, 2007.
Technical Conference/Seminar attended : |
- International Level Workshop on Reverse Engineering, Rapid Prototyping, FEM arranged by Team Tech-2006 at I.I.Sc., Bangalore, Feb.2006.
- National Seminar on Recent Trends in Reverse Engineering organized by PESIT, Bangalore, Nov 2006.
- A One Day Workshop on CAD/CAM/CAE organized by PESIT, Bangalore, Nov2005.
5 DEVARAJ E.
Training/Certificate/Journal papers :
- Undergone training program on Bearing Vibration and Acoustics organized by ORIGIN ENGINEERING SOLUTION.
- Undergone training program on “MEMS and NANO TECHNOLOGY” organized by BMS College of Engineering.
- Presented the paper on “A study on strength of SS316L and Ti-6Al-4V as cardiovascular stent materials by non linear FEA” in National Conference on Challenges in Biomaterials Research (NCCBMR’ 13), VIT University, Vellore.
- Published the paper on “Study of mechanical and wear behavior of carbon fiber/epoxy resin composites with alumina-oxide filler additions” in International Journal of Engineering Research & Technology (IJERT) Vol. 2 Issue 10, October – 2013 ISSN: 2278-018.
- Published the book on “The study on mechanical behavior of Al2O3 filler: epoxy composites” in
LAP LAMBERT Academic Publishing, ISBN-13:978-3-659-55563-3,ISBN-
10:3659555630,EAN:9783659555633
6 MUZZAMMIL ULLA SHARIFF
Publications :
Thermal Analysis of Micro gas turbine rotor blade
Design challenges in micro gas turbine
Non-linear transient and structural analysis of rotor assembly of micro gas turbine
Other Achievements :
Designed and successfully built 2 passenger solar car
Represented India for 18 countries for renewable energy technology which was held in Bangalore in 2009 [Spacecraft] which was published in Indian news dailies.
Successfully built a prototype combustion micro gas turbine, looking forward to applying for patent.
7 PURUSHOTHAMAN NAYAKA D.S.
Publications :
1.“The Performance and Emission of Compression Ignition Engine Fuelled with Biodiesel from Cotton Seed Oil “at international conference on recent advanced and challenges 2012 at MANIPAL UNIVERSITY, Jan 2012.
2.“The Performance and Emission of Direct Ignition Engine Fuelled with Biodiesel from Pongamia Pinnate” at national conference on recent emerging trends at ACHARYA INSTITUTE OF TECHNOLOGY, Nov 2011.
3.” A overview of cotton seed oil as BIODIESEL” at state level conference at EKALAVYA INSTITUTE OF TECHNOLOGY, Mysore in March 2011.
4.“The Effect of Injection Parameters on CI Engines Performance and Emissions Using Sesame and Pongamia Pinnata Methyl Ester as Fuels” in IPASJ international journal of mechanical engineering ISSN 2321-6441 at volume 2& issue 7, July 2014.
5.“Effect Of Injection Parameters On Engine Performance And Emissions Using Cotton Seed Biodiesel As Fuel “in International journal of emerging trends in engineering and development, ISSN 2249-6149,issue 4,volume 3, April-May 2014.
Other Achievements :
1.Guided a team to win 12 NATIONAL LEVEL PRIZE in technical paper presentation held at Chikkodi, Belgaum, in March 2012.
2.Guided a team to win 6 NATIONAL LEVEL PRIZE in technical paper presentation at KONGU FEST, Erode in Jan 2012.
8 MOHAN H.S.
Paper presentations in Conference :
1. “International Conference on Advances in Engineering, Technology & science 2014” at Munnar, Kerala, India during 26th to 27th April 2014.
2.“International Conference on Advances in Material AND Manufacturing Engineering (ICAMME’’14) Chennai, India during 19-20th December, 2014
3.NIE College of engineering, Mysore during May 2014
Publications :
1.Title “Laser Assisted Brazing of Ceramic and Titanium Alloy using Cu-Ag Filler material” Published in Trans-Tech Publication 19-20th December, 2014.
9 ANIL B.N.
Publications :
1.A STUDY ON PERFORMANCE OF IC ENGINES WITH EXHAUST ENERGY GAS HARVESTER” has been selected for International Conference On Electrical, Electronics, Computer Science and Mechanical Engineering on 30th December2014 at Chennai, India
2. REAL TIME TRAFFIC MONITORING SYSTEM AND DRIVER ASSISTANCE has been Published for International Conference On International road federation 21st September-2014, Vizag, India, ISBN: 978-93-84209-53-7
10 BAQUER MOHIUDDIN
Workshop Organised :
Actively participated in Faculty development Programme(FDP) at Brindavan college of engineering organized by Wipro called Mission 10X.
Conference Presentations:
1.National conference on “Structural analysis and weight reduction of front end loader of tractor” conducted in Dayanand Sagar College of Engineering in oct 2013.
2.International conference on topic “ Weight reduction of front end loader of tractor” in Dayanand sager college of engineering , Bangalore in December 2013.
11 DEEPAK MALGAR
Workshop Organised :
Actively participated in Faculty development Programme(FDP) at Brindavan college of engineering organized by Wipro called Mission 10X.
Conference Presentations :
1.Conference Presented: National conference on “Investigation of fatigue behavior of traction gear” conducted in Dayanand sagar college of engineering in oct 2013.
2.International conference on topic “Investigation of bending stress behavior” in Dayanand sager college of engineering , Bangalore in December 2013.
12 MANJUNATH M.V.
Workshop Conducted :
1.Faculty development program Brindavan college
2.Enhanceing and teaching skill and development instruction strategies
3.Structural VIBRATIONS- LINEAR AND NON LINEAR APPORACH
13 SALEHA NADEEM
Publications :
1.Wireless sensor network for automating the Agricultural management purposes- A survey.
2.A study of bloom energy server as an alternate source of energy for Agricultural sector.
14 LAKSHMANA NAIK
Conference attended :
1.“MECH TECH 2013? National Level Technical symposium at shirdi sai college of engineering, Anekal, Bengaluru – 562 106.
15 AFRIN NK
Workshop attended :
1.One day workshop on Continuum Mechanics on 03.11.2025 at VTU